01: Practical Welding Course: Manual Metal Arc (MMA or Stick) Welding

Home Course Categories Technical01: Practical Welding Course: Manual Metal Arc (MMA or Stick) Welding

TW~001 - Practical Welding Course: Manual Metal Arc (MMA or Stick) Welding

Duration: ± 6 weeks | Course Code: TW~001 | Cost From: R 7,500 ($500) per person

This course is designed to train welders using the Manual Metal Arc, MMA or Stick Welding Process up to an International Coded Standard.

The course consists of 19 Modules, each of which should be completed sequentially to ensure consistent progress through the course material.

Students will notice there is a considerable Practical Component to the Course - naturally you need to practice to be a competent welder! Take this seriously - if you do not get it then you will never be a good welder.
The starting point for this Course is the Introductory and Safety Modules. Carefully complete these so that you get some basic grounding, even if you feel you are familiar with the material. Safety is of particular importance, and on completion of the course some consideration should be given to proceed with the OHS Courses in this website.

To demonstrate competence, you need to demonstrate both Theoretical and Practical Competence in the workshop environment, showing the Instructor a good knowledge and understanding of the principles mentioned, and skill in completing the welding process.

The course requires access to a Training Centre or Workshop where Practical Work can be carried out under Supervision of an Instructor.

To watch the video, you need to have downloaded and installed Adobe Flashplayer and Adobe Reader. Click on them to download them free

(When watching the video trailers, it is best to start the video and then immediately pause it, then wait a few minutes to allow streaming before starting play again.)

Objectives

To train personnel from no knowledge or skill, up to a Coded Welder status (International Standard) through the use of Theoretical and Practical Training sessions.

Target Audience

Workshop personnel wishing to become welders
Private individuals wishing to train as welders (they will require access to a workshop for the practical component)

Learning Outcomes

To have a complete knowledge and understanding of the Manual Metal Arc Welding process, equipment and consumables
To be able to successfully weld two or more pieces of metal, using a variety of welding positions and different joint configurations using the MMA Welding Process
To be able to consistently join metal together using the MMA process to a quality acceptable to International Standards and Specifications

Scope & Requirements

An Instructor/Training Supervisor is necessary to ensure all practical components of the course are completed properly
Access to a workshop or training facility is essential. The Practical component is a large part of the course.
Adequate Equipment, Consumables and Practice Test Pieces are required. There should be sufficient materials to enable the learner to practice until competent.

Cost

R 7,500 per person

$ 500 per person for international students

Group discounts available on request

Price excludes use of materials and facilities and all practical testing.

Note

All Material is subject to Copyright. A Certificate of Completion will be sent to those who complete the course.

Duration: ± 6 weeks

Course Code: TW~001

Our Training Partners

A short guide to starting one of our courses...

Select the course you are interested in from the list of courses
View the course to find out: Duration, Cost and Scope
Send an enquiry to find out how to register and start learning online.
Interested in more than one course? Make a note of the reference numbers of each and select the first course as above, and add the references of additional courses in the message block of the enquiry form. We do the rest.

Our Online Courses