Our Online Courses

Browse our increasing list of Courses and Course Categories.

HomeCourse CategoriesTechnical05: Welding Quality Control, Inspection & Testing

TW~003 - Practical Welding Course: Tungsten Inert Welding (TIG) Process

Duration: ± 6 weeks | Course Code: TW~003 | Cost From: R 7,500 ($500) per person

This course is designed to train welders using the Tungsten Inert Gas (TIG) Welding Process up to an International Coded Standard. 

The course consists of 17 Modules, each of which should be completed sequentially to ensure consistent progress through the course material.

Students will notice there is a considerable Practical Component to the Course - naturally you need to practice to be a competent welder! Take this seriously - if you do not get it then you will never be a good welder.

The starting point for this Course is the Introductory and Safety Modules. Carefully complete these so that you get some basic grounding, even if you feel you are familiar with the material. Safety is of particular importance, and on completion of the course some consideration should be given to proceed with the OHS Courses in this website.

To demonstrate competence, you need to demonstrate both Theoretical and Practical Competence in the workshop environment, showing the Instructor a good knowledge and understanding of the principles mentioned, and skill in completing the welding process.

The course requires access to a Training Centre or Workshop where Practical Work can be carried out under Supervision of an Instructor.

To watch the video, you need to have downloaded and installed Adobe Flashplayer and Adobe Reader. Click on them to download them free

(When watching the video trailers, it is best to start the video and then immediately pause it, then wait a few minutes to allow streaming before starting play again.)


To train personnel from no knowledge or skill, up to a Coded Welder status (International Standard) through the use of Theoretical and Practical Training sessions.

Target Audience

  • Workshop personnel wishing to become TIG welders
  • Private individuals wishing to train as TIG welders (they will require access to a workshop for the practical component)

Learning Outcomes

  • To have a complete knowledge and understanding of the Tungsten Inert Gas Welding process, equipment and consumables
  • To be able to successfully weld two or more pieces of metal, using a variety of welding positions, material thicknesses and different joint configurations using the TIG Welding Process
  • To be able to consistently join metal together using the TIG process to a quality acceptable to International Standards and Specifications

Scope & Requirements

  • An Instructor/Training Supervisor is necessary to ensure all practical components of the course are completed properly
  • Access to a workshop or training facility is essential. The Practical component is a large part of the course.
  • Adequate Equipment, Consumables and Practice Test Pieces are required. There should be sufficient materials to enable the learner to practice until competent.


R7,500 per person
$ 500 per person for international students
Group discounts available on request
Price excludes use of materials and facilities and all practical testing.


All Material is subject to Copyright. A Certificate of Completion will be sent to those who complete the course.

Duration: ± 6 weeks
Course Code: TW~003

How to start...

A short guide to starting one of our courses...

  • Select the course you are interested in from the list of courses
  • View the course to find out: Duration, Cost and Scope
  • Send an enquiry to find out how to register and start learning online.
  • Interested in more than one course? Make a note of the reference numbers of each and select the first course as above, and add the references of additional courses in the message block of the enquiry form. We do the rest.

Connect with us

FACEBOOK linkedin twitter

About Comet Training

Comet Training is a trading name for The Penny Ferry (Pty) Ltd, a limited liability company established in 1996. The Penny Ferry has been involved in hands-on training and e-learning for many years, specializing in the Marine, Environmental, Tourism, Industrial, Health and Technical markets. Through close associations with other organizations, Comet Training was established to better promote a suite of e-learning applications to the global markets.